Rent FiTelS-175 V2000 Fiber Fusion Splicer

The S175 V2000 combines the speed and precision of Furukawa engineering with easy-to-use, operator-friendly functionality. The splicer automatically analyzes the fiber type and chooses the correct program. After splicing, detailed data about the splice is available in two presses of the keypad and can be downloaded or printed with ease. The S175 Version 2000 also provides remote PC operation and specific software (optional).

Key Features:
17-second splice time single mode, 90 second protection
Remote PC operation with software package (optional)
Fully automatic core-to-core alignment
Automated splice program selection Simultaneous viewing of X and Y axis with automatic magnification control
Advanced arc power control with environmental sensing at splice point
Diecast metal top including internal AC power unit and integrated color monitor
Windshield-integrated Fiber Clamp. Just load fiber, close windshield and start

Rent S-175 V2000

The S175 is the fastest, the smallest and the easiest splicer among the world’s direct core monitoring machines. It is so easy to use that the splicer automatically analyzes the fibre type from Single Mode, Multi Mode and Dispersion Shift Mode and load the suitable splice program. Simply load the fibre, close windshield and press the start key to begin splicing. The durability and reliability is much improved and the maintenance is extremely reduced.

Features:

  • Silica glass based optical SM / MM/ DSF fibers
  • Coating / Clad Dia: 0.25-0.9mm / 0.1-0.15mm
  • Cleave Length: standard 16mm optional 10mm
  • Average loss:SM: 0.02dB MM: 0.01dB DS: 0.04dB(with identical Furukawa fibers)
  • Reflection: -60dB or lower
  • Estimation accuracy: +/- 0.05dB (loss <0.4dB), +/- 15% (loss>0.4dB)
  • Operating time: Splice: 20s (typical),Heat: 90s (typical for S921)
  • Tension test: 200g (0.4lbs), option 440g (0.9lbs)
  • Attenuation splice: 0 to 10 db by 0.1 db
  • 32 Splice Program with one Auto splice mode; 4 pre-programmed, 28 customisable
  • Inspection: Cleave angle, Fibre end gap, core eccentricity, offset, tilt, micro bending, Bubble at spliced point
  • Auto sleep mode
  • Remote control from PC
  • Display information: operating message, ARC counter, clock, heater status, estimation loss, finder image X Y view
  • NOTE: A capacity to store 9 languages including:- GB, D, F, I, E, CZ, NL, DK, RUS, P, S, FIN, JP, CHINA, KOREA (some are currently in development)

Rent FiTel S-175 V2000

Specifications:

Applicable Optical Fiber

  • Silica glass-based optical fibers SM/MM/DSF/EDF/TrueWave®/LEAF®
  • Coating/Clad Dia.: 0.25-0.9mm
  • Cleave Length: Standard 16mm or 10mm only for 0.25 mm coating diameter and 16 mm for 0.9 mm coating; Optional
  • 10 mm for 0.25-0.9 mm coating
  • Applicable sleeves: 40 or 60mm

Splice Performance

  • Average loss: SM: 0.02 dB; MM: 0.01 dB; DS: 0.04 dB (with identical Furukawa fibers)
  • Reflection: -60 dB or lower
  • Operating time: Splice: 17s (typicaly at high speed mode)
  • Heat: 90 s
  • Tension test: 200 g (0.4 lbs)

Equipment

  • Built-in cooling fan
  • LCD: 5’’ color with anti-reflection coating
  • Video: NTSC (PIN connector)
  • Data: RS232C (D-sub 9 Pins male)
  • Memoria: 400 splices
  • Sensor: air pressure, temperature, humidity
  • Lamp: V-Groove illumination

Operating Environments

  • Temperature: -10 to 50°C (14 to 122°F)
  • Storage: -40° to 60°C (-40° to 140°F)

Function

  • Auto sleep mode Remote Control from PC
  • Attenuation splicing: Optional 0 to10 dB by 0.1 dB
  • 32 splice program with one auto splice mode – 9 pre-programmed; 28 customizable
  • Inspection: Cleave angle, fiber end gap, core eccentricity, offset, tilt, micro bending, bubble at spliced point
  • Display information: operating message; arc counter, clock, heater status, estimation loss, finder image X- and Y-views
  • Message: A capacity to store 9 languages. Contact your dealer for details

Size/Weight

  • 181W x 285D x 181H mm / 6.3 kg
  • 7.1 “W x 11.2” D x 7.1 “H/13.9 lbs.

Power

  • AC 100/120, 200/240 V 50/60 Hz DC 10-16.5V with LED indicator
  • Power consumption: Max. 70 W, typical 27 W, sleep 20 W

Lease FiTel S-175 V2000 Fiber Fusion Splicer Rental